Admixture and Paver Surface Treatment Supplier to Manufactured Concrete Products Producers



Patent pending, layer spacers. Protect concrete surfaces from contact abrasion and scuffing between layers.

Recommended For

Dry Cast Pavers & Slabs

Wet Cast Pavers & Slabs

Concrete Masonry Units

Segmental Retaining Wall Units

Technical Information

Color: Off-White

Health & Safety

Consult SDS for Safety Information


Features & Benefits

  • Layer spacers protect concrete surfaces from contact abrasion and scuffing between pallet layers.
  • Unique, patent pending shape reduces rolling during dispensing and holds spacers and layers in place during shipping. Spacers will not stack on top of each other, which may cause uneven layers, as can occur with flat shaped spacers.
  • High load-bearing capacity.
  • Homogeneous pressure transmission.
  • More economical than sheet separators and much easier to clean up and dispose of on the jobsite by brushing or vacuuming.
  • Reduce cube efflorescence by allowing air to circulate between separated layers and between a top sheet and top layer of units.
  • Low Impact - most applications require less than 2 1/2 cups of spacers per pallet.
  • ColorScape AirFlow Spacers are manufactured by Green Dot BioPlastics, a leader in BioPlastic manufacturing.

Guidelines for Use

Application: Typical application range is 35 to 70 g per meter2 of layer surface area - about 1/6 to 1/3 cup (40 to 80 ml) by volume per layer. Not recommended when pallets are stacked more than 6 levels high. Please consult your Technical Services Representative for more

Product Storage and Shelf Life

Storage: ColorScape AirFlow Spacers should be protected from moisture during storage.

Copyright © 2024 All Rights Reserved